How To Get Through A Structural Home Inspection Before Closing

Before selling your house, it may be necessary that it first passes a structural inspection by a structural engineer.  It is their job to assess the condition of the property, determine whether it is liveable, diagnose problems and prescribe solutions.  Here are a few steps, especially if your house is on the older side, to help you pass a home inspection.


If your house has weathered a few winters without getting a decent clean, it may be time to break out the ladder and get a little dirty.  Since an inspection will be looking at things like drainage, give the eaves a clean and remove any blockage that may have developed. If you have a crawlspace, make sure that it is clean and can be accessed.  Also, clear any overgrowth around you house to make for an easier structural inspection.  The inspector will no doubt appreciate this as it will make their job a whole lot easier. More details!

Small Fixes

            If you’ve noticed any small problems around your house, now is the time to nip them in the bud.  Issues such as minor leaks in the plumbing, cracked siding may require a hired professional, but if you know for certain that they will not pass inspection, you may as well fix them now.  Do not try and be a hero!  Many issues are exacerbated by unskilled handiwork.

Acquaint Yourself With The Engineering Report 

A great way to prepare yourself for an inspection is to know what they will be looking for.  As mentioned above, there may be certain things you can do in preparation for their visit, so find out what your house needs to pass and you will be better prepared for when inspection time comes.  This may save you a whole lot of time and maybe even some money.

Preemptively Hire An Inspector 

            If you’re selling an old home that you know has fundamental problems, there is no sense in getting to the point of sale only to find out what you already know.  These problems may include, but are not limited to:

Foundational Flaws- Slanted floors, or bowed walls are a pretty good indicator that your house is in dire need of foundational repair.  This can be incredibly costly, but should be taken care of immediately.

-Pests- Termites, birds and rats can wreak havoc on a house.  They can create unsanitary living conditions and compromise the structural integrity of your house.  An exterminator may need to be hired.  With rats, avoid the use of poison, as they may die inside your walls and a costly extraction may be needed.

-Damaged Roof- Check for any signs of leaking, or structural flaws in the roof.  If it is sunken or misshapen, a costly fix may be in your future.  Smaller leaks can be patched up relatively painlessly, however.

-Brickwork- If your house has any brickwork, check it for any signs of building flaws, or weather damage.  Through alternating hot and cold seasons, stonework shrinks and expands over time causing it to crack.


With these things in mind, you should be better prepared to put your house on the market.  Make sure you give yourself a decent amount of time, as many of these things can be lengthy fixes.  Furthermore, the structural engineer will be appreciative that you have done your due diligence. Check out this site:

Have a Foundation Crack? Consult a Structural Engineer

There are many structural engineers in the industry but it can be difficult to hand pick the best one. You may have abundant choices, but selecting a structure engineer can be a tough task. Here are some handy tips that will help you take the right decision while hiring a structure engineer.

What You Must Look For?

Typically, you must look for quality assurance, accreditation and association. This means that the consulting engineers should be ISO certified, and they must be associated with the state association of engineers. For instance, in Ireland the ACEI and CPD govern the laws. The company that you hire must be an accredited company. Apart from that, they must offer different types of services for projects such as commercial, residential, infrastructure, educational, heritage and landscape.

The structural engineer should also be an expert in fire safety engineering, and BER certificates and audits. Disability access is another area that should not be ignored. Besides, a structure engineer must offer a host of services. Given below is a checklist of the services that construction engineering should offer.


Design and approval:

This aspect includes the preliminary design and detailing of a building. The building could be a house, apartment, office, retail shops, outlets, industrial units, factory, hotels, refurbishments, warehouse, and heritage building and so on. Typically, the service provider creates an aesthetic design with cost-effective structure. A structural engineer will undertake design on different types of building elements like foundation, floor, beam, columns, walls, roof, basement and so forth.

Structural surveys and reports:

A structural survey is conducted on an existing structure or a new property. Some of the elements checked in a survey would include critical and non-critical items like subsidence, settlement, wall and floor cracking, damp, fire damage and much more.

General engineering reports:

Engineering reports may be required on a variety of different situations. Some of the situations include legal disputes with building contractor, damage to your property, monitoring property, party wall disputes and similar others.

Certificate of compliance:

This aspect of a structural engineer has provision for certificate of compliance with planning and building regulations and certificate of exemption from planning. The construction engineering company must comply with all of the above.

Project management:

This service will guide you from the inception to the completion of your project. The service provider will liaison between you and your contractor, offer cost control on project, check quality, offer technical advice, and provide product advice and much more.

Property defects surveys and reports:

The service provider will provide subsidence, settlement, wall and floor cracking, damp or mould, water leakage, fire damage, interior or exterior wall, insulation, heat loss, poor workmanship, to name a few.

Heritage development:

A structural engineer will also look into structural surveys and reports, protect structures, design works to protect heritage buildings, monitoring the behavior of heritage structure during adjacent work and a lot more.

To conclude

These are some of the factors that you must consider while hiring consulting Foundation Inspection engineers. These services will ensure that your project is carried out effectively and smoothly without any obstacles. Besides you can also get a BER audit done, and upgrade the existing property to meet the expectations of environment safety.

see more:

Have a Foundation Crack? Consult a Structural Engineer

You need to consult a structural engineer if you see a foundation crack. This can be something serious and you need to get it repaired as soon as possible. The one question that many people have, is where do they find a structural engineer that they really can trust? Because this isn’t something that you don’t use every day. With this guide, you will be able to know where to find a structural engineer to look at your property’s foundation crack.

First of all, do research

If you think that you need to have foundation repairs done to your property, then you need to hire a structural engineer. But, the problem is that you might not know where to find one locally.

This is why you should make sure that you are doing as much research as possible. You need to know where you can find these engineers. There will be a couple of them locally that you can use. And, with the research, you will know more about them and will know what previous clients are thinking about them and their services.

Ask around to building contractors

The people that are working with structural engineers most of the time is building contractors. And, this is why you should talk to them and find out where you can find a reliable and trustworthy engineer for your foundation cracks.

They will be able to give you some names and numbers of engineers that you can call for a quotation. They will also be able to tell you about the engineers that you should stay away from. Because of their experience in working with them, you should take their advice seriously. Check here.

Make sure that the engineer has the right experience

You need to make sure that the engineer that you are considering using has the right experience. You might think that because they are a qualified engineer, that they will have the right experience. However, this isn’t always the truth. He might have the qualifications as a structural engineer, but he might not have experience in inspecting foundation cracks.

This is why you should make sure about this experience in the type of work that you need to get done. This is if you want to make sure that you are going to get the problem fixed correctly.

He needs to have a license for inspecting foundation cracks

This is one of the most essential things that you should make sure about before you hire an engineer for foundation repairs. He needs to have a license for inspecting foundation cracks. He might be a qualified engineer, but it doesn’t mean that he has the license for inspecting cracks and to make sure that it isn’t too serious and dangerous for the people living in the home.

With this information, you will know how and where to find an engineer for inspecting and looking at foundation cracks. This isn’t something that you can just leave and hope for the best.  With hiring a structural engineer, you will know for sure that your foundation problems can be repaired. Click here for more information:

Why Buying a House with Foundation Problems is Risky?

Many people underestimate the chance of buying a house with foundation problems and the foundation repair scope of fixes needed. Foundation problems generally decrease the value of the home. It can even be very costly, tense, inconvenient, and take a lot of your energy to repair. Fixing a home’s foundation is a lot more extensive than simply doing home design or design. And you do not want to be shocked by incredible costs once you move into your brand-new home.

So, we’re here to tell you all about the potential risks and costs of shopping for a house with foundation problems.

Cost of foundation repair

Structural Inspection

If you are considering buying a residence with possible basis problems you must get an effective evaluation from a structural engineer. While home inspectors are able to recognize the problem, they are usually not qualified to provide a full analysis. A structural engineer will examine the home and inform you of the exact cause and what needs to be done. A proper structural inspection and evaluation by the structural engineer will cost you around $500 to $700 and may even be of up to $1,000. Once, you’ve received the analysis of the building blocks you will need to get quotes from specialized foundation repair contractors. With these estimates, you can negotiate a fair price better.

Minor Foundation Repairs

The particular cost of auto repairs may vary depending on the extent of foundation issues. Minor vehicle repairs may include mending and changing gutters, putting epoxy shots in foundation cracks or bolting on metallic brackets to secure the building blocks. Epoxy injections remain $350 to $450 each. Metal braces are about $70 to $500 each and must be spaced 6 toes apart across the wall.

Major Foundation Repairs

For major basis foundation repairs, you may need to mount piers under the foundation. Each pier is about $1,200 to $1,500 plus they need to be installed every six to eight 8 feet. If there is a considerable amount of damage you may want to rebuild part of the foundation. This can cost you tens of thousands of us dollars. And in the most extreme cases, you may need to lift your house and put in a completely new foundation, that could set you back up to $100,000!

Additional costs

On top of foundation repairs, you may even need to fix foundation-related problems. That includes breaks in the drywall, crooked doors and windows, broken and uneven tiles, and even damaged floors. These household foundation repairsmust be done as well as repairing the actual basis if you purchase the house.

Signs of base problems

Signs of foundation problems are very apparent in the inside and exterior of the house. Once you are house shopping, check for these indications to see if there might be a likelihood of base issues.

Inside the house

  • Misaligned gates & windows.
  • Sloping floors
  • Cracking walls

Outside the house

  • Exterior breaks and bulging
  • Chimney
  • Leaning content & beams
  • Normal water under the home

Be sure to check each one of these indications and understand the risk and costs of shopping for a residence with base problems before you decide to choose the house.  Investing in a home with foundation problems may seem like a high-risk proposition, but so long as you know just what you are getting into, it’s possible to have those foundation repair issues fixed.

What To Expect From A Structural Inspection

Getting a structural inspection, whether for a property you possess or are interested in purchasing, isn’t an everyday occurrence. It is not even an annual event. It is only needed for your protection or as proof of building quality to some other individual. The following is a simple guideline of what will likely happen during a run-of-the-mill structural inspection:

What Will Be Inspected?


When engineers come to make a Structural Inspection, their ultimategoal is to identify any safety hazards that the structure has. Therefore, not only do they look at the structure itself, but also anything that is mounted on the structure, like a garage, porch, deck, or guest house. All of these items, yet others, will be both examined and evaluated.

Exterior And Interior

With regards to the interior and exterior of a structure, the Structural Engineer can look for any deteriorated or distressed conditions. They will also suggest potential repairs and the estimated selection of costs. This distress and deterioration are usually conditions that are so extreme that they effect the stability and integrity of the building. Among this type of distress is weather tightness on siding and windows.


When an inspector is evaluating the roof conditions, they’ll take a close look at any evidence of leakage, roof surfacing, current performance, layers, kind of roof, flashing, the health of the gutters, and sheathing. If any of these require attention, they’ll show you possible repair options and their costs.


With framing, the goal of the Structural Engineer is to identify structural deficiencies, estimate the scope of required repairs and their cost. To get this done, they’ll take a look at every visible and accessible portion of the framing. In this investigation, they’ll look for just about any deterioration, such as rot, insect activity, and wood deterioration. The extent of the investigation is merely visual. They can offer you advice on what needs to change and the upside to this is that you can do the framing yourself, it’s incredibly easy once you know how, just head over to garage craftsman to lean exactly how to do this.

Crawl Space And Basement Water

The part of the Engineering Report that includes basement and crawls space water will describe how adequate water control systems are, as well as a story of any water-related conditions. It could include everything from limitations of inspection to potential risks of water entry, along with possible repairs and their costs. To get these details, the inspector will look at the problem and existence of water control systems equipment, excessive moisture on the premises, any evidence of water entry or water accumulation in the basement or crawl space, and surface draining conditions surrounding the building. Click here.


With regards to the building blocks, the Structural Engineer will look for obvious signs of significant deterioration or distress in the foundation. If any are located, they will provide you with possible repair solutions and the various costs. To do this evaluation, the inspector will look at accessible portions of the building blocks, like the wall, floor, slab and much more. They will mainly look for attachment, bowing, movement, and cracks.

What Will Not Be Inspected?

  • Repair Designs
  • Fire Safety
  • Systems
  • Hazardous Materials
  • Code Compliance

What Are The Potential Outcomes?

You will either receive a clean bill of health on the building or you won’t. Moreover, it is good to remember that a few dents and damages here and there don’t mean you will not be successful. Quite just, because cracks or leaks are located, doesn’t mean you will not still get a clean bill of health. A crack could be caused by thermal damage as opposed to the structural integrity of the building being questioned.

To get more information or schedule a scheduled appointment, contact Structural Engineer. To find out more, check out


Don’t Neglect Your Final Inspection

When it comes to buying a home, there are fewer aspects more important than the final inspection. It is literally the last opportunity you will have to not only look through the property but also raise any concerns before ownership is transferred and any problems become yours.


With this in mind, below is some advice to keep in mind in the lead up to your final inspection.


It Isn’t a DIY Job

Even if you are a property inspector who has been working in the field for decades, you shouldn’t do your own property inspection. Always hire a professional to attend the property alongside you. When speaking with potential inspectors, ask the following:


  • Does their inspection include the roof
  • Are they willing to crawl under the house to inspect foundations?
  • What is their experience?
  • What are their qualifications?
  • When can you expect to receive the report?
  • What is the total cost?


The answer to these questions will help you to find the right property inspection for the job. In addition and most importantly, be sure to listen to your instincts and ensure that you feel comfortable with them. After all, they are your last line of defence against any potentially hidden problems with the property.


On the Other Hand, You Shouldn’t Leave Everything up to the Inspector



For example, if you enjoy taking advantage of the Groupon Coupons page for GameStop then you will want to make sure the voltage throughout the home’s electrical system is solid and isn’t going to ruin your gaming gear.


The best ways to find identify any problems such as these is the following:


  • Plug a cell phone charger into each socket in the house to ensure it works
  • Run your hands along each of the walls to fell for any damp spots which can indicate hidden water damage
  • Be sure each of the faucets operates correctly
  • Ensure all of the toilets flush without problems
  • If there are any inclusions in the property, be sure they are present and working


Bring a Friend

The third tip comes in the form of a third person. While your property inspector will be paying attention to the structure and you will be paying attention to the smaller details, bring along a friend or a family member who has been through the process before to look through the property.


While you can’t expect them to provide you with a report, ask them to look for anything which doesn’t seem right or anything which they wish they had noticed during their final inspection which is now causing them problems. They can also be a big help when it comes to choosing a property inspector having been through the process themselves.


When it comes to your final inspection, the worst thing that you can do is let the day go by without any interaction. Keep the above tips in mind when it comes tips for your final inspection and makes the most of the opportunity.

The importance of structural engineers today

structural engineers

When we speak of construction structural engineering comes to mind as the most fundamental discipline as it deals directly with structural integrity and strength of a building or structure. Remember, from large-scale business to small-scale construction, building structures that are innovative is a vital aspect of your reputation. Below are the importance of structural engineers

Structural design

Structural engineers are vital for the designing of the individual elements of the building as well as the whole structure. Note that modern structures require loads of creativity when defining the expected support and load resistance system. Structural engineers will therefore provide detailed and precise information on the foundation, floors, roof types, beams, steel quality needed, alignment, durability and retaining walls.  It is important that the structural engineer conduct a thorough structural inspection after it is built and ensure that all the products needed were used and the design is effective.

Structural analysis

if you want to use the complex design and composite material in modern structures the structural engineer will have to employ the effective use of structural analysis as this will assure design reliability, safety, strength, stress design basis and material specification. Structural engineers and architects working together normally define and describe the external and internal factors of concern when constructing. These factors may include velocity, load, intersection, nodes, components and landscape. They will further show you the capabilities of the structure in terms of support and performance as required by the building design code, customer needs, aesthetic feature and criteria.

Safety assessment

It is the structural engineer’s role to assess and predict the safety by assessing the capacity and structure stability against static and dynamic loading. They check the external and internal forces, the material used, earthquake, vibration, creep, structure fatigue, temperature and any dynamics that have bearing on the structure. It also identifies the ability for a structure to offer warning signs before its collapse and the requirement of their serviceability way after the structure’s completion.

This ensures the safety of the workers, visitors as well as the house owners and consequently reducing the dangers involved.

The structures estimation

Structural engineering will help in dividing a complex structure into individual elements while creating their separate designs and analysis for them. In addition, they will offer the most suitable geometry and material requirements for them. This process will provide information on steel beams, frames, girders and columns thus allowing the contractor to test the design efficiency as well as the materials required for use, the budget to be used and most of all aiding the creativity and efficiency of resource utilization.

In conclusion, builders, contractors, civil engineers and property owners can benefit greatly from the information and structural engineer’s services. This will help avoid the dangers involved in building without proper foundation and design that could eventually lead to unprecedented fall of the building leading to potential loss of life and consequently law charges.

With detailed specifications architects, civil engineers and constructors can work with structural engineers to successfully build a good design building that offers safety. Visit:

The Path to Becoming a Structural Engineer

The Path to Becoming a Structural Engineer

Becoming a structural engineer can be highly rewarding and certainly something more are looking into also. Engineering is quite varied to say the least and it can cover anything from new constructed buildings to coming up with ideas for bridges and all sorts. Structural engineering is varied and that’s why there are so many today who love the idea of this career path. It’s utterly amazing and becoming a structural engineer is a lot less complicated than you might think.

You Must Finish Schooling

For those who are still in high school, it’s a must to finish with your schooling first before becoming a structural engineer. You might not be aware of the fact that engineering is surprisingly all about math so you really need to look into some math courses. If you excel in math you shouldn’t have too much trouble. Once you have graduated high school, it wouldn’t hurt to take some college courses such as math and even one or more of the sciences. Engineering requires these fields of expertise, even with a simple engineering report so you have to ensure you handle these things with ease. With good courses behind you, you give yourself a real boost for success.

The Path to Becoming a Structural Engineer

Take an Internship and Get a Bachelors Degree

Engineering is varied as said and once you have finished up with school, it would be a perfect idea to intern. Internships are ideal simply because they enable those with no experience in construction or engineering a chance to see what this is all about. Entry level jobs can be great too because it gives you a lot of help and information about what engineering (and the specific area you’re interested in) involves. However, internships are only the start of the process to become a structural engineer. Some companies will put internees through college courses to gain a bachelors degree in engineering which can be more than useful. If this isn’t a possibility, you will need to go through the necessary courses to gain a bachelor’s degree.if you need more information click here.

Obtain a License

Once you have a bachelor’s degree in engineering it is now necessary to obtain the mandatory state licensing to be able to work legally in the US. Acquiring the license can, in fact, take up to four years and while this might sound a very long time, it’s necessary to gain experience. When you choose a college course or engineering school you must ensure it’s accredited and offers a varied course too. You must pass the final two examinations and when the four years of work is complete, the license is obtained. When you create an engineering report you will find there is a lot that goes into it so you need a lot of experience.

Becoming an Engineer

Being an engineer can really be fun and not as difficult as it once was. Yes, engineering and learning the trade can take several years but once you go through the necessary studies and courses, you can achieve your dream job. This is why there are now more people than ever before choosing the engineering field and it certainly is a popular field. Being a structural engineer is very popular today and will continue to do so.

Read more here in this link

The Hopeful Tomorrow Of Structural Engineering

The Hopeful Tomorrow Of Structural Engineering

From foundation repair to creating mega structures, engineers have major responsibilities when it comes to constructing buildings and all sorts! You wouldn’t think structural engineering would be complex as we have come a long way from the Stone Age and yet, it is. Engineering has changed a lot over the years and it’s interesting to see where it’ll lead to in the future. So, where will structural engineering really lead to?

Modern Challenges

Anyone who will tackle structure engineering is going to find they have a mountain of modern challenges to deal with. For instance, the landscape is ever changing and building structures over waterways and even a new bridge can be challenging. Modern challenges really prove to be a major issue for a lot of experienced engineers, never mind newcomers to the field. There is a lot to learn from foundation repair to reports and understanding what makes a structure safe. These things are highly important, especially when it comes to keeping people safe and sound at all times.please visit this url:

The Ever Changing Environment


To be honest, there are a lot of challenges ahead for structural engineers simply because the environment is changing—and on a daily basis. The environments in which we build upon change very frequently and that makes it even harder to safely construct buildings and all sorts. However, while that may become a major issue, it doesn’t mean it’s impossible to safely construct a building. A structural engineer needs to contend with a lot of new factors such as earthquakes, flooding, fires, and everything else. Yes, those things are always a risk but since the environment is changing, so too with the risks involved, even natural disasters. Engineers must take these things into account today and tomorrow when creating an infrastructure.

The Hopeful Tomorrow Of Structural Engineering

Changing the Way We Learn

Surprisingly, engineers are becoming better trained and more knowledgeable than ever before. Structural engineering has changed over the last 20 years and it’ll change again within the next two decades. That essentially means people have to get better so that structures are safer and not just for those who build it but who live within it. Yes, the environment is ever changing but so too are the way people learn. Foundation repair and the way it is handled will change, as well as how people learn about it. That is why there are now more and more people who continue to learn even after they are licensed. It’s an important here to read more knowledge.

The New World for Engineers

It is no doubt over the course of the last two or three years, structure engineering has changed and in the years to come, it’s going to change even more. Structure engineers really have to deal with a lot of things, especially when it comes to dealing with modern challenges and the ever changing landscape. Structural engineers are going to be faced with a mountain of problems but with that come exciting new challenges too. A structural engineer really does have a variety of responsibilities and must be aware of all new threats so they can do their jobs effectively.

Common Mistakes When Hiring a Structural Engineering Consultant

Common Mistakes When Hiring a Structural Engineering Consultant

Having difficulty in deciding which structural engineer to hire? You are not the only one to struggle with this decision as thousands each and every day struggle to choose between engineering consultants. There are many good professionals to choose from and when you have little experience in this area things can be made a lot tougher. Most people make simple and very common mistakes that result in them hiring the wrong people for the job. It’s wasteful and certainly very costly too but it doesn’t have to happen anymore. Read on to find some common mistakes you may face when hiring a new structural engineer consultant.

You Rush To Hire Someone

When do you plan to hire someone? Unfortunately, a lot of companies wait until the very last second to hire a professional and as a result, they end up rushing through this process in order to hire someone. This isn’t the ideal way to hire someone simply because the wrong one can be chosen and that will only result in you wasting a considerable amount of money. Instead, you must take your time to find the best consultant. You should create a list of potential candidates and then narrow down the choices to a select few and go from there. The professional you hire shouldn’t just know what they’re doing but have sufficient experience to deal with a structural inspection and everything else. This will be very important to say the least.if you need more information click here.

Have You Interviewed Someone Before?

Let’s be honest, interviewing someone you barely know is not easy, even when you have some confidence behind you. When you have little to no interviewing experience then it can be extremely tough to hire the best structural engineer consultant. It’s a common mistake most people make and it’s very costly, too. However, if you get in some simple practice before the actual interviews take place, things can go a lot smoother. What’s more, you should create a small list of questions to ask the consultant so that you’re sure they’re the best for the job.

Common Mistakes When Hiring a Structural Engineering Consultant

No Background Checks

Due diligence is crucial when hiring a consultant. Far too many people don’t do this and end up hiring a less-than-desirable professional which costs them a lot of money. It’s a major mistake on your part not to conduct thorough background checks and it could be costly in more ways than one. You should always take the time to carry out the necessary checks; even if it means taking an extra day or two to make the final decision. Remember, they will be carrying out a structural inspection as well as checking the safety of the building so it’s necessary the right professional is found.


Read more here in this link:

Don’t Make a Mistake

The above are three simple yet common mistakes a lot of companies make and they really can end up costing them far more than they ever anticipated. You absolutely want to avoid this problem simply because it’ll waste lots of resources and time. Hopefully now, you know a little more about the common mistakes you will be able to avoid them in the future. You can find the best structural engineer consultant if you put your mind to it.